2018-08-27 18:55:34 By:Utand Stone Machinery (1797)
stone polishing hand machine first test, time setting is determined by the requirements of the product, can be adjusted for a long time, can be taken out of the product to check the polishing effect, until the satisfaction, then remember the time, after the polishing of the same product according to the time set.
In theory, when polishing, less water can save the polishing fluid, and the downward pressure of the polishing workpiece (water has buoyancy) suggests that the workpiece is large, light, and when the water is as small as possible. For the real core workpiece, heavy, it is suggested that the water can be properly added, and the benefits of the workpiece float up.
The size of the force is proportional to the machining efficiency. The force is large and the ability to remove the burrs is strong, but it is easy to throw the surface of the workpiece into foggy (similar to sandblasting) shape. However, the brightness of the reflector will increase.
stone polishing hand machine makes use of its unique magnetic field distribution to produce strong and stable magnetic effect, so that the magnetic steel needle and the workpiece are fully lapping in all directions and multi angles to achieve rapid rust removal, dead angle, removal of burr batches, oxidation film and sinter marks. Especially for complex workpiece, porous joint, internal and external thread and other workpiece, it can show its magical effect. Moreover, it does not affect the workpiece surface, and does not affect the workpiece accuracy. Let the workpiece instantly become smooth and clean and new. It is suitable for grinding and polishing non-metal parts such as gold, silver, copper, aluminum, zinc, magnesium, iron, stainless steel, and hard plastics.
Plate to four brush (2 up 2 down) swing to high pressure water wash (30Kg/cm2) to cycle wash water to wash the water to dry, dry to dry.The deburring machine is mainly used for PCB removal of burr holes, surface oxide layer and special equipment for purifying surface. 30Kg/cm2 high pressure cleaning pump can thoroughly remove burrs and surface dirt, and is the key equipment to ensure the quality of PCB plate.
stone polishing hand machine is widely used in small and medium precision parts to deburr, fly edge, reverse angle, rust, oxide skin, electroplating pretreatment, and remove processing knife lines. The deburring machine has a polishing and cleaning new energy at the same time of deburring. It is especially suitable for burrs of complicated parts, micro precision parts, deformable thin arms, thin sections and narrow slits. The biggest advantage of deburring machine is not only changing the size accuracy of workpiece, but also improving the appearance and feel, and polishing and brightening. After polishing, the surface of the workpiece can be light.
stone polishing hand machine makes use of its unique magnetic field distribution to produce strong and stable magnetic effect, so that the magnetic steel needle and the workpiece are fully lapping in all directions and multi angles to achieve rapid rust removal, dead angle, removal of burr batches, oxidation film and sinter marks. Especially for complex workpiece, porous joint, internal and external thread and other workpiece, it can show its magical effect. Moreover, it does not affect the workpiece surface, and does not affect the workpiece accuracy. Let the workpiece instantly become smooth and clean and new. It is suitable for grinding and polishing non-metal parts such as gold, silver, copper, aluminum, zinc, magnesium, iron, stainless steel, and hard plastics.
Suitable for precision parts such as light metal, non-ferrous metal, rigid plastic, etc.
achieves multiple functions such as burrs, chamfering, polishing, washing and so on.
for irregular parts, holes, tubes and other dead corners, cracks and so on can be polished.
.customization time, quick processing speed, simple operation and safety.
variable frequency adjustment to meet various polishing requirements.
polishing without dead angle.
end reminder can remind polishing finish, one person can operate multiple.
.voltage, current, frequency and time can be monitored, concise and clear .
polishing process does not require manual intervention in.
magnetic polishing polishing does not have dead corners, so that all parts are completely lapped. After grinding, the workpiece will never be deformed, never damage the surface, and will not affect the accuracy.
has low cost, fast speed, about 2-20 minutes to complete, simple operation, convenient, completely free of technology, multi machine operation.
write down your requirement and contact details in the following form to get the latest price of this product within one day!
Hi, we intend to sell this website, if you are interested, please contact us:
Email:529733977@qq.com
Address:Huanan industrial park,Foshan City,Guangdong Province.
Contact UsArtificial Quartz Stone Production Machinery
Home | About Us | Products | Artificial quartz | Case | News | Service | Contact Us |